Alpenföhn Gletscherwasser 360 Processor All-in-one liquid cooler Black
- Complete water cooling system in cooperation with overclocking legend Roman “der8auer” Hartung
- Quiet and powerful pump with 3 phase motor
- Thermal Grizzly Hydronaut Thermal Compound
- Pre-filled and completely maintenance-free
- Wing Boost 3 ARGB Premium fan
- Interchangeable logo plates
- Safe mounting system
Alpenföhn is presenting with the “Gletscherwasser” a premium AIO- water cooling solution with addressable RGB lighting. This solution has been done in cooperation with the overclocking legend Roman „der8auer“ Hartung. Within the set, there are Wing Boost 3 ARGB fans as well as Thermal Grizzly Hydronaut heat transfer compound, offering a nice round package with superior thermal performance and silent operation. The exchangeable logo plate also enables individual designs. Gletscherwasser offers full compatibility with Ryzen 5000 / Zen 3. The final assembly of the water cooling solution is done in Germany!
Pump
The diamond ground Copper base plate of the pump unit possesses large area micro-channels to dissipate the waste heat of the CPU into the cooling circuit quickly and efficiently. Pump speeds between 1200 U/min and 2600U/min offer an extremely balanced performance spectrum for every aspect of your requirements. Decide yourself whether overclocking or virtual silence is on your mind. An intelligent cooling routing in a two-chamber design within the pump housing offers noise reduction whilst increasing performance and longevity in comparison to conventional designs. The finish of the injection moulded pump housing and cover is enriched by piano lacquer.
Radiator
Gletscherwasser contains an Aluminium high performance radiator. For enhanced safety within your system, the radiator uses a “leak-free” design. In the very unlikely case of a leak within the cooling system, the pressure inside the system is regulated to avoid any loss of coolant. Therefore your hardware is always SAFE.
Heat Transfer Compound
The included Thermal Grizzly Hydronaut paste with its excellent thermal conductivity can be used for normal as well as overclocking applications. It was developed specifically for large area applications as for example found in water cooling systems. Main advantages: No dry-out, silicone free and electrically insulating.
Wing Boost 3 ARGB
With its 16,8 million colours the Wing Boost 3 ARGB offers numerous possibilities to put your case into the right light. The addressable RGB LED lights are integrated into the fan housing and vaguely show the impeller as well as shine stylishly to the outside.
Air flow optimized fan blades
By means of a new blade angle the rotor has been optimized to lower speed in order to achieve in comparison with other fans a significantly higher volume flow, total pressure and exit speed at the same speed. Thanks to the Wing Boost 3 technology, air turbulence at the impeller is greatly reduced to ensure even quieter operation at full fan speed.
IC motor control
High-quality IC motor control minimizes electrical noise, especially in the low speed range, to a minimum.
Fluid Dynamic Bearing
By using the Fluid Dynamic bearing, we can realize a low-vibration and whisper-quiet operation of the fan.
PWM speed control
The new Wing Boost 3 supports speed control using the motherboard’s PWM signal.
De-vibration Pads
The de-vibration rubbers reduce the often annoying noises, which are transmitted by the vibrations of the fan to the case, by their excellent anti-vibration characteristics to a minimum.
Do it yourself!
Realize your dream project with the included logo plates for the pump unit. All plates can be orientated freely on a 90° pattern. Do you require more creativity? The clear logo plate can be customized to your choice: Ideal for own logos, clan motives etc. Simply twist the bayonet cap on the pump head, swap the logo plate and close the cap. That’s all? Yes – Wow, that was easy.
| Performance | |
|---|---|
| Fan speed (max) | 1600 RPM |
| Pump motor speed (min) | 1200 RPM |
| Pump motor speed (max) | 2550 RPM |
| Fan static pressure | 2.19 mmH2O |
| Fan speed (min) | 500 RPM |
| Pump connector | 3-pin |
| Fan bearing technology | Fluid Dynamic Bearing (FDB) |
| Fan noise level (max) | 23.5 dB |
| Pulse-width modulation (PWM) support | Yes |
| Airflow | 92.6 m³/h |
| Supported processor sockets | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket AM4, Socket FM1, Socket TR4, Socket sTRX4 |
| Type | All-in-one liquid cooler |
| Suitable location | Processor |
| Design | |
|---|---|
| Fan controller | Yes |
| Water block material | Copper |
| Fan connector | 3-pin + 4-pin |
| Illumination colour | Blue, Green, Red |
| Illumination LED | Yes |
| Number of fans | 3 fan(s) |
| Radiator material | Aluminium |
| Product colour | Black |
| Power | |
|---|---|
| Pump voltage | 12 V |
| Fan voltage | 12 V |
| Fan current | 0.57 A |
| Pump current | 25 mA |
| Pump power consumption | 2.4 W |
| Weight & dimensions | |
|---|---|
| Fan dimensions (W x D x H) | 120 x 120 x 25 mm |
| Height | 86 mm |
| Tube length | 4.65 cm |
| Depth | 26 mm |
| Radiator height | 12 cm |
| Radiator depth | 2.7 cm |
| Radiator width | 40.2 cm |
| Width | 75 mm |
| Other features | |
|---|---|
| Noise level | 17.8 dB |
| Thermal grease | Yes |
| Number of fans supported | 3 |
| Logistics data | |
|---|---|
| Harmonized System (HS) code | 84733080 |
- leaflet
